EasyManua.ls Logo

Levoit Core 200S Series - Getting Started; Filter Installation; Placement and Clearance

Levoit Core 200S Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
GETTING STARTED
1. Flip the air purifier over. Twist the filter
cover counterclockwise and remove it.
[Figure 1.1]
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier. [Figure 1.2]
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
Figure 1.1
Figure 1.2
Figure 1.4
Figure 1.3
4. Place the air purifier on a flat, stable
surface with the display facing up. Allow
at least 15 in / 38 cm of clearance on all
sides of the air purifier. Keep away from
anything that would block airflow, such as
curtains. [Figure 1.4]
cover should
snap shut
15 in /
38 cm
15 in /
38 cm

Related product manuals