Levoit Core 300-RAC - Filter Replacement Timing; Filter Replacement Procedure; Proper Storage Guidelines

12
EN
1. Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the purifier using a vacuum hose.
Do not use water or liquids to clean the
purifier. [Figure 3.2]
4. Unwrap the new filter and place it
into the housing (see Getting Started
,
page 7).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
page 11).
Replacing the Filter
Figure 3.2
If not using the air purifier for an extended
period of time, wrap both the purifier and the
filter in plastic packaging and store in a dry
place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The filter should be replaced every 6–8
months. You may need to replace your filter
sooner or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
more often, even if
is o.
You may need to replace your filter if you
notice:
• Increased noise when the air purifier
is on
• Decreased airflow
• Unusual odours
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your air
purifier, only use ocial Levoit filters.
To buy replacement filters, visit Levoit’s
online store. Go to levoit.com for more
information.
• Remember to reset after changing
the filter.