11
Storage
There are 2 ways to store your vacuum.
Note:
• Always store the vacuum on flat
ground. If the vacuum is stored on
a slanted surface it may fall and be
damaged.
• If storing for long periods of time,
periodically charge the battery to
preserve the life of the battery.
Figure 5.1
Figure 5.2
To store on the ground:
3. Place the roller brush on flat ground and
attach the stick. Lock the stick into the
standing position [Figure 5.2].
4. Take the vacuum body, remove any
attachments, and store the vacuum
body on top of the vacuum head by
hanging it on the hook near the bottom
of the stick [Figure 5.2].
90°
To use the wall mount:
1. Install the wall mount by screwing it into
the wall [Figure 5.1].
2. Hang the vacuum on the wall mount
[Figure 5.1].
To Next Page
Loading...
Need help?
General
