7
Note: Regularly check to make sure the
vacuum cushions and the roller brush
are clean to avoid scratching sensitive
floors or walls.
USING YOUR VACUUM
1. Unpack the vacuum and make sure all
parts are included.
2. Attach the vacuum head to the bottom
of the stick and attach the vacuum body
to the top [Figure 1.1].
3. Slide the On/O button forward to
turn the vacuum on. Slide the button
to Stage I for hard floors or small area
rugs, or slide to Stage II for carpets
[Figure 1.2].
4. Slide the On/O button back completely
to turn the vacuum o [Figure 1.2].
Figure 1.1
Figure 1.2
Status Description
5 solid lights
Battery is fully
charged
3 solid lights
Battery is at 50%
capacity
1 blinking light
Battery is almost
empty
No light Battery is empty
Light Chart
To Next Page
Loading...
Need help?
General
