Levoit Vital 200S-P - Light Detection; Display off

11
USING YOUR SMART AIR PURIFIER (CONT.)
Display Off
Light Detection
Timer
This turns o the display lights on the air
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
You can manually set the timer for 2, 4, or 8
hours using the button. You can also set the
timer for 1–24 hours through the VeSync app.
1. Tap repeatedly to select a time. The
timer will start automatically.
1. Tap to turn o the display.
2. Tap any button to temporarily turn the
display back on. If you don’t tap another
button, the display will turn back o after
6 seconds.
3. Tap to turn the display back on. The
display will stay on.
Note: You can set a timer for 1–24 hours in the
VeSync app.
Note:
• The Check Filter Indicator will still turn on
and stay on if it’s time to check your filter
(see page 14).
• With light detection on, it is unable to keep
the screen lit in a dark room.If you prefer to
keep the display lit up, you can turn o the
light detection in Vesync APP.
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when active.
• When the timer is set through the
VeSync app, the indicator will light
up instead. Once the timer has finished,
the air purifier will turn o.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time is
changed.
2. To cancel the timer, tap until all timer
indicators are o. You can also turn the
timer o in the VeSync app.
Note:
• When the light detection on and room
is in darkness, if the air purifier is in
Auto Mode or Pet Mode, it will not use
the high or turbo fan speed to avoid
making too much noise.
• When the room becomes light again,
the air purifier will return to its previous
setting. The display will automatically
turn back on.
• With the light detection on, if you click
display o, the screen will stay o;
however, you can’t get the screen to
stay on in a dark room.
1. The light sensor is o by default. You
can turn on/o Light Detection in the
Vesync APP. You can also press and hold
display button for 3 seconds to turn on/
o Light Detection, and the air quality
indicator blinks once when the operation
is complete.
2. While the air purifier is operating, the
Light sensor will detect the brightness
of the room and work according to the
ambient light.
Room light Display
Dark Display o
Light Display on