Lewis Resto - User Manual

John Lewis
Resto 90cm Children’s Daybed
Stock number black: 803/44912
mist: 803/45032
Thank you for purchasing this Resto Children’s Daybed. Please read the instructions carefully
before use to ensure safe and satisfactory operation of this product.
For product support or spare parts
please call the John Lewis Helpline;
Tel: 01244 - 689949
e-mail:mail@fwgroup-uk.com
Pre-assembly Preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product takes approximately
40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains
SMALL PARTS which should be KEPT AWAY FROM YOUNG
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING
to avoid personal injury and (or) damage to the product.
1/5

Summary

Pre-assembly Preparation

Necessary Tools

Details the tools required for assembly, emphasizing preparation before starting.

Fittings and Parts Checklist

Bedstead Parts

Lists the main structural components of the daybed, including quantities and visual representations.

Fittings

Details all screws, nuts, washers, and tools provided for assembling the daybed.

Step-by-Step Assembly Instructions

Step One: Attaching Headboards

Connects the headboards to the back panel using specified screws and nuts.

Step Two: Attaching Side Rails

Attaches the side rails to the assembled headboards using screws and washers.

Step Three: Installing Cross Bars

Secures the cross bars to the side rails using screws and nuts.

Step Four: Adding Slats and Stoppers

Installs the wooden slats by fitting them into the fabric strap and securing with side stoppers.

Care and Maintenance

Metal Furniture Cleaning

Provides guidance on the best cleaning agents for the daybed's metal surface.

Safety Instructions

General Safety Warnings

Covers essential safety precautions for assembly, handling, and usage, including age suitability and placement.

Overview

1. Technical Specifications
2. Components and Fittings
3. Usage Features
4. Safety Instructions
5. Maintenance Features
6. Assembly Process
7. Customer Support

The John Lewis Resto 90cm Children's Daybed is a metal-framed bed designed for children, featuring a classic, ornate style with curved headboards and a back panel. It is intended for use with a standard single-size mattress measuring L190 x W90 x H18 cm. The daybed serves as both a sleeping surface and a piece of furniture that can function as a seating area during the day, making it a versatile addition to a child's room.

Technical Specifications:

• Product Name: Resto 90cm Children's Daybed
• Stock Numbers: Black: 803/44912, Mist: 803/45032
• Mattress Size: L190 x W90 x H18 cm (standard single size)
• Material: Metal frame with wooden slats
• Assembly Time: Approximately 40 minutes with 2 people
• Compliance: BS 8509:2008 + A1:2011

Components and Fittings:

The daybed assembly requires various parts and fittings, including:

• Bedstead Parts:
  • Back Panel (x1)
  • Headboards (x2, Left & Right)
  • Side Rail (x1)
  • Wooden Slats (x15)
  • Cross Bars (x2)
  • Fabric Strap (x1)
• Fittings:
  • JCBC Screw M6 x 20mm (x6)
  • JCBC Screw M6 x 30mm (x4)
  • JCBC Screw M6 x 40mm (x2)
  • M6 JCN Nut (x6)
  • Side Stopper (x30)
  • M4 Allen Key (x2)
  • Washer (x4)

Usage Features:

The Resto Daybed is designed for children and offers a safe and comfortable sleeping environment. Its daybed design allows it to be placed against a wall, serving as a sofa-like seating area when not being used for sleeping. The wooden slats provide support for the mattress, and the side stoppers ensure the slats remain securely in place.

Safety Instructions:

• Assembly: Assembly should be carried out by a competent adult. Children should be kept away from the product during assembly due to the risk of injury from small parts.
• Movement: Never drag the furniture; always lift it to avoid damage or injury.
• Fixings: Periodically check all fixings to ensure none have come loose and re-tighten them as necessary.
• Damage: Do not use the item if any components are missing, broken, or damaged.
• Age Restriction: Not suitable for children under 4 years old.
• Placement: Do not place the child's bed near heat sources, windows, or other furniture.
• Child Behavior: Children are prone to playing, bouncing, jumping, and climbing on beds. Therefore, the bed should not be placed too close to other furniture, windows, blind cords, curtain pulls, or other strings/cords. It should be placed either tight against a wall or with a gap of 300mm between the wall and the side of the bed.
• Handling: Exercise care when handling or moving the furniture to prevent personal injury or damage to the product.

Maintenance Features:

• Cleaning: For cleaning the metal frame, a slightly damp cloth is recommended.
• Avoid Harsh Cleaners: Do not use abrasive cleaners or harsh detergents, as these can damage the surface finish of the metal.
• Regular Checks: Regular inspection of all fixings is crucial to ensure the daybed remains stable and safe for use. Re-tighten any loose fixings promptly.

Assembly Process:

The assembly process is broken down into four steps:

1. Step One (Headboards to Back Panel): Attach the two headboards to the back panel using JCBC Screws (M6 x 20mm and M6 x 35mm) and M6 JCN Nuts. Tighten with the M4 Allen Key.
2. Step Two (Side Rail to Headboards): Attach the side rail to the headboards using JCBC Screws (M6 x 20mm) and Washers. Tighten with the M4 Allen Key.
3. Step Three (Cross Bars to Side Rails): Place the two cross bars into the side rails and secure them using JCBC Screws (M6 x 30mm) and M6 JCN Nuts.
4. Step Four (Slats and Side Stoppers): Insert each of the 15 wooden slats into the fabric strap, ensuring the curved side faces upwards. Place a side stopper on both ends of each slat and secure them into the holes in the side rails. Repeat this process for all slats.

Customer Support:

For product support, spare parts, additional information, or any issues with the product, customers can contact the John Lewis Helpline:

• Telephone: 01244 - 689949
• Email: mail@fwgroup-uk.com

The daybed is delivered with a comprehensive leaflet that includes a fittings and parts checklist, detailed step-by-step assembly instructions with diagrams, and important safety and maintenance guidelines to ensure the product's safe and satisfactory operation. The product is described as "HEAVY," emphasizing the need for care when lifting and assembling it as close to its final point of use as possible to minimize movement.

Lewis Resto Specifications

General

Brand	Lewis
Model	Resto
Category	Indoor Furnishing
Language	English