Lewis Resto - Step Three: Installing Cross Bars; Step Four: Adding Slats and Stoppers

5
B
D
4/5
Take a Slat (4) - ensuring the curved side is facing up - and insert into the Fabric Strap (6).
Place a Side Stopper (E) on both ends of the Slat (4) and secure to the bed by fitting the Stoppers
into the holes in the Side Rails (3). Repeat step for all Slats.
Place the Cross Bars (5) into the Side Rails (3) and secure using JCBC Screw M6 x 30mm (B) and
M6 JCN Nut (D).
Step Three
Step Four
6
E