Need help?Do you have a question about the Lewmar 44 and is the answer not in the manual?
Read this before installing and Operating your Electric Winch.
Winches used incorrectly could cause harm to equipment or crew.
Describes how to identify manual convertible winches by date markings and stickers.
Details steps for preparing a manual winch for electric conversion.
Instructions for fitting a complete new electric winch from new.
Specifies recommended rope entry angle and surface mounting requirements for optimal performance.
Emphasizes checking under-deck space and optimal output gear placement.
Instructions on using provided templates for drilling and cutting deck holes.
Details positioning deck switches, tubing, and sealing warnings.
Guidance on selecting and using correct bolts for winch mounting.
Detailed instructions for fitting a convertible electric winch, from placement to final assembly.
Instructions for mechanically coupling the drive unit and gearbox to the winch.
Guidance on positioning circuit breaker and routing cables from battery to control box.
Instructions for connecting motor cables to the control box and positioning the box.
Details on positioning deck switches and routing wires to the control box.
Provides installation schematic, cable size table, and critical wiring warnings.
Illustrates and describes the correct rotational direction for the winch spindle.
Explains how to read graphs showing line speed and amperage draw relative to load.
Presents performance data graphs for Model 40 (12V/24V) and Model 44 (12V).
Displays performance graphs for electric winches Models 48, 50, 54, 58, and 64.
Provides performance graphs for the Model 66/3 electric winch.
Presents performance graphs for electric winches Models 77/3, 88/3, and 111.
Details maximum safe working loads and recommended rope diameters.
Explains different speed and manual operation modes for the winches.
Details correct procedures for feeder arm adjustment, rope turns, and rope handling.
Instructions on safely switching off the winch using the circuit breaker/isolator.
Essential safety warning to turn off power before performing any maintenance.
Details monthly, seasonal, and end-of-season maintenance tasks.
Specific instructions for checking and maintaining the motor and gearbox.
Notes on part replacements for winches manufactured after February 1995 and specific models.
A warning stating manual winches cannot be converted to electric with listed parts.
Detailed diagram and table of parts for Lewmar electric winch models 40 through 64.
Detailed diagram and table of parts for Lewmar electric winch models 66 through 111.
Detailed measurements for various winch models, including diagrams and tables.
Provides total weight for different winch models in various finishes.
A step-by-step guide to diagnose and resolve common winch operational issues.
Lists available electric winch models, part numbers, finishes, and descriptions.
Details circuit breaker models, voltage ratings, and associated part numbers.
Details terms, conditions, limitations, and exclusions of the Lewmar limited product warranty.
To Next Page
General