Copyright © Lexibook 2005
7
Indicates the
barometric pressure trend
is increasing.
Indicates the
barometric pressure trend
is steady.
Indicates the
barometric pressure trend
is decreasing.
Thermometer:
n Press “-(°C/°F)” button to select Indoor/Outdoor Temperature in Celsius mode/ Fahrenheit
mode.
Outdoor thermo sensor unit registration procedure:
n The weather station automatically starts receiving transmission from Outdoor Thermo
Sensor for outdoor temperature after new batteries are inserted.
n The sensor will automatically transmit temperature to the weather station after batteries
inserted. Batteries compartment of thermo sensor is locating behind the back cover,
unscrews to open.
n For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2
or CH3 to ensure each sensor is transmitting difference channel before inserting batteries.
The channel select switch is at the back of the thermo sensor.
n Press “TX “ button on the thermo sensor unit to transmit temperature to the weather station
manually. The weather station gives a “beep” sound if it received the temperature.
Display outdoor temperature:
n Press “CHANNEL” button to view the 3 Channels’ temperature. The sequence is shown as
follow:
Press Press Press
“
CHANNEL” button “CHANNEL” button “CHANNEL” button
Display the three channels alternatively.
n Hold “CHANNEL” button for 3 seconds to cancel unused channel manually. It will
automatically register a new channel again if a new channel is received.
n The trend pointer displayed on the LCD indicates the trend of the outdoor temperature.
Indicates the outdoor
temperature is increasing.
Indicates the outdoor
temperature is steady.
Indicates the outdoor
temperature is decreasing.
n Press “°C /°F” button, on the Thermo Sensor unit, to select Thermo Sensor displayed in
Celsius mode or Fahrenheit mode.
SM880GB.qxd 16/02/2005 10:44 Page 7
To Next Page
