TW40Z
What's on the display
If the unit power ON
Channel number (1 to 8)
Sub-channel number (0 to 38)
Battery charge level. When the bars reduce, the battery
needs charging.
Shown when you are transmitting the signal.
PTT button
Press and hold while
you are transmitting.
and buttons
ON/OFF button
Microphone
Socket for hands-free kit
Under the hinged
cover.
MENU button
CALL button
Press to send Ring
tones to other handsets.
Select the desired 2nd channel by pressing or button.
Press the MENU button once to change the CTCSS code.
Press the or buttons to select the desired CTCSS code.
Press the PTT button to confirm the setting.
The display switches backwards and forwards between the two channels. If the handset
detects a signal on either channel, it will stop and receive it. As long as the unit is in Dual
watch mode, DCM is shown steadily on the display.
To end the Dual Watch mode
Press the MENU button seven times.
The channel number flashes on the display.
Press the or buttons until ‘OFF‘ is shown on the display.
Press the PTT button to exit from the Dual Watch mode.
Scanning Channels
When the Scan function is turned on, the handset will continuously scan through all eight
channels and all 38 sub-channels until it finds one on which another user is transmitting.
Press the MENU and the button at the same time.
SCAN appears on the display, and the handset begins to scan.
When a signal is detected, the unit will pause.
Press the button to continue scanning channels 1 to 8.
Press the button to scan the Sub-channels.
Press the PTT button to stop the scan and communicate.
Locking the buttons
With the buttons locked you can transmit (Talk), receive or monitor (MON) the current
channel. But you can't change the volume ( ) or use the MENU button.
To lock the buttons:
Press and hold the MENU button until " " appears on the display.
To unlock the buttons:
Press and hold the MENU button until " " disappears from the display.
4. Cleaning and care
To clean your PMR, use a soft cloth dampened with water. Do not use cleaners or
solvent, which may cause damage not covered by the guarantee.
5. Technical specification
Operating frequency 446.00625 to 446.09375 MHz (eight channels)
Channel spacing 12.5 KHz
Output power 0.5 W
6. Declaration of conformity
We, Lexibook
®
S.A.
2, Av de Scandinavie, 91953 Courtaboeuf Cedex France
declare under our sole responsibility that the product
Kind of product: Walkie-Talkie with charger
Type number: TW40Z
to which this declaration relates, is in conformity with the following standards and/or
other normative documents.
ETSI EN300 296-2: 2001
EN301489: 2002
EN60065: 1998
We hereby declare that the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
Denis Mauduit
Quality Manager
Interference Elimination Codes
(CTCSS - Continuous Tone Coded Squelch System)
7. Troubleshooting
Problem Possible cause — solution
No power.
• Battery is low or not fitted correctly
→
check
• PMR is not switched on
→
check
Weak reception/
no reception/
noisy reception.
• Battery is low or not fitted correctly
• Other user is not within range
→
check
• PMR are not tuned to the same channel
→
check
• Noisy reception is more likely when using high numbered
sub-channels
→
try using a lower- numbered s ub-
channel, agreeing it with the rest of your group first
• Volume level is too low
→
increase the volume
•
→
Speak in a normal voice, 5-8cm (2-3 inches ) away
from the microphone
• Local conditions are impairing reception
→
move to a
different location away from obstructions and as high
as possible
• Other user is not transmit ting
→
check
• Other user is too close
→
check
• There's interference from other users on the same
channel
→
agree to use a different channel
Cannot change
channels.
• PMR is locked
→
check
• Battery is low or not fitted correctly
In VOX mode, the
handset transmits
ali the time.
• Background noise is high
→
move to a quieter place
• VOX sensitivity is too high
→
set it to a lower level
In VOX mode, the
handset doesn't
transmit.
• VOX sensitivity is too low
→
set it to a higher level
•
→
Speak in a louder voice, nearer to the microphone
8. Guarantee and service
The Lexibook
®
TW40Z is fully guaranteed for 24 months from the date of purchase.
The guarantee does not cover damage by misuse or negligence, or by excessive
voltages.
When you first unpack your Lexibook
®
TW40Z , check for visible damage. If you see
any damage, don’t use the handsets — return the whole system to where you
bought it.
If your Lexibook
®
TW40Z develops a fault, first check the points above. If you cannot
solve the problem, return the whole system to where you bought it.
Lexibook
®
operates a policy of continuous product improvement, and so
reserves the right to make changes to the product and functions without notice.
The equipments is intended for used in:
Austria Finland Latvia Spain
Belgium France Liechtenstein Sweden
Bulgaria Germany Luxembourg Switzerland
Croatia Greece
The Netherlands
Turkey
Cyprus Hungary Norway UK
Czech Iceland Poland Romania
Denmark Ireland Portugal
Estonia ltaly Slovenia
Walkie-Talkie
User Guide
Reference: TW40Z
©2006 LEXIBOOK®
Designed and developed in Europe - Made in China
Customer Service
LEXIBOOK UK ltd
Unit 10 Petersfield Industrial Estate
Bedford Road, Petersfield
Hampshire, GU32 3QA,
United Kingdom
Freephone helpline: 0808 100 3015
<http://www.lexibook.com
Environmental Protection
Unwanted electrical appliances can be recycled and should not be
discarded along with regular household waste! Please actively support
the conservation of resources and help protect the environment by
returning this appliance to a collection centre (if available).
Press to change
the speaker
volume. Press
after menu
button to change
the channels.
Press to change
channels and
sub-channels and
to switch between
modes
To Next Page
Need help?
General
