Why is my Lexicon CP-3 Processor recalling modes erratically?
If you are experiencing erratic recall of modes on your Lexicon Processor, this may be due to severe power surges or sags. To correct this, restore the factory defaults using the procedure described.
How to eliminate hum from my Lexicon CP-3?
If you are experiencing hum with your Lexicon Processor, finding and eliminating audio hum in a complex installation can be very frustrating. Systematically eliminate devices from the audio chain.
Why is the rear speaker off in THX mode on my Lexicon CP-3 Processor?
Check the CP-3 MUTE controls to make sure they are not engaged if the rear speaker is off in THX mode on your Lexicon Processor.
Guidelines and procedures for connecting the CP-3 to other audio-visual components.
Procedures for calibrating the CP-3 to optimize sound performance based on the listening environment.
How to lock system settings to prevent accidental changes, ensuring system integrity.
Explanation of how to select and engage the CP-3's primary operating modes.
Overview of the Surround modes, including Television, Music, and THX Cinema.
Explanation of Pro Logic mode for Dolby Pro Logic surround decoding.
Guide to using THX Cinema mode for an immersive film audio experience.
A reproduction of the Setup menu options for recording calibration values.
To Next Page
General