Lexicon
MC-12 Serial Communications Protocol Printed on: 07/19/04
© 2004 Harman Specialty Group All rights reserved. 4 of 102
7.3.23 Clear Record Input (MC-12, MC-1) 28
7.3.24 Set Zone2 Volume (MC-12, MC-1) 28
7.3.25 Set Zone2 Left/Right Balance (MC-12, MC-1) 29
7.3.26 Set Custom Name (MC-12, MC-1) 30
7.3.27 Set Input Name by Id (MC-12, MC-1) 30
7.3.28 Set FPD Control Registers (MC-1) 31
7.3.29 Host Wakeup (MC-12, MC-1) 31
7.3.30 Host Sleep (MC-12, MC-1) 32
7.3.31 Get Communication Configuration (MC-12, MC-1) 32
7.3.32 Set Communication Configuration (MC-12, MC-1) 33
7.3.33 Set Mute (MC-12, MC-1) 33
7.3.34 Set Output Level Adjustments (MC-1) 34
7.3.35 Send Display String Command (MC-12, MC-1) 34
7.3.36 MC-12 Get Parameter Definition by Id (MC-12) 35
7.3.37 MC-12 Set Parameter Value by Id (MC-12) 37
7.3.38 MC-12 Set Parameter Value by Id, No Run (MC-12) 39
7.3.39 MC-12 Get Unit Configuration (MC-12) 39
7.3.40 MC-12 Send IR Command (MC-12) 42
7.3.41 MC-12 Get Parameter Value by Id (MC-12) 42
7.3.42 MC-12 Set Parameter Notification by Id (MC-12) 43
7.3.43 MC-12 Parameter Get Value String by Id (MC-12) 44
7.3.44 MC-12 Clear All Parameter Notifications (MC-12) 45
7.3.45 MC-12 Get System Status (MC-12) 45
7.3.46 MC-12 Get Record Status (MC-12) 47
7.3.47 MC-12 Set System Volume (MC-12) 48
7.3.48 MC-12 Set Main Balance (MC-12) 48
7.3.49 MC-12 Set Front/Back Balance (MC-12) 49
7.3.50 MC-12 Set Active Effect by Id (MC-12) 49
7.3.51 MC-12 Set Record Input (MC-12) 50
7.3.52 MC-12 Set Zone2 Volume (MC-12) 51
7.3.53 MC-12 Set Zone2 Left/Right Balance (MC-12) 51
7.3.54 MC-12 Get Input Name by Id (MC-12) 52
7.3.55 MC-12 Set Input Name by Id (MC-12) 53
Appendix A Command Codes 54
Appendix B Error Codes 56
Appendix C DC-2, MC-1 IR-Codes 57
Appendix D MC-12 IR Codes 58
Appendix E MC-1 Input Id’s 60
Appendix F MC-12 Input Ids 60
Appendix G Protocol Constants 60
Appendix H MC-12 to MC-1 Effect Map 61
Appendix I MC-1 to MC-12 Effect ID Map 62
Appendix J MC-12 Mode Ids 63
To Next Page
Loading...
