Lexicon RT-10 - RT-10 Technical Specifications; Audio Output Connectors and Performance

Video Output Connectors
Audio Performance
Audio Output Connectors
Appendix
Lexicon
A-2
SPECIFICATIONS
Note the following:
• The RT-10 is manufactured for sale in several different
countries. Each version features a rear panel that includes
connectors appropriate to that particular region. These
specifications include all possible connectors. However, certain
connectors are not included on some versions. These instances
are noted in the rear panel connector descriptions that begin
on page 2-8.
• DVD-A and SACD test discs were used to determine audio
specifications. Typical production unit specifications might
differ.
• Specifications are subject to change without notice.
• 4 stereo (RCA) pairs for Front L/R (2 pairs), Surround
L/R, Center, and Subwoofer
Analog
• 1 AES/EBU (XLR), 1 coaxial (RCA), and 1 optical
(Toslink)
• Sample Rates: 44.1, 48, 88.2, and 96kHz (16 to 24
bits)
• All digital audio output connectors conform to IEC-958
and S/PDIF standards.
Digital
• 24-bit/192kHz PCM and pure DSDD/A Conversion
• 20Hz to 20kHz (±0.5dB), -1.0dB at 50kHz, reference
1kHz (Front L/R)
Frequency Response
• 0.004% at 1kHzTHD + Noise
• 100dBDynamic Range
• 100dBSignal-to-Noise Ratio
• 100dBChannel Separation
• 2.0V maximumOutput Level
• 2 (RCA)Composite
•1S-Video
• 2 (1 RCA and 1 BNC) and 14-pin D connectorComponent
Specifications are subject to change without notice.