RV-5 Mode Adjust
6-23
DTS, DTS-ES & DTS(-ES) Discr
This mode decodes 5.1 matrix or 6.1 discrete channels from DTS-ES
sources. It is designed for playback of 5.1-channel DTS, 5.1-channel
matrix-encoded DTS-ES, and 6.1-channel discrete-encoded DTS-ES
sources.
The six decoded main channels are full-frequency. The .1 channel,
often referred to as LFE information, has a limited frequency range
of 120Hz.
The listening mode name differs, depending on the encoding
present in the input source, the DECODING parameter setting, and
the speaker setup. Refer to page 6-21 for more information.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions.
DTS 2-CHAN & DTS-ES 2-CHAN
These modes, recommended for recording purposes, send
downmixed 5.1-channel or 6.1-channel DTS-ES input signals to the
front speakers and subwoofer as 2-channel Logic 7-encoded output
signals.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions.
Option/Parameter Default Setting Possible Settings
LFE MIX +0.0dB –10.0 to +0.0dB
ES DECODING AUTO AUTO, ON, OFF
OUTPUT LEVELS Refer to page 6-28
CUSTOM Refer to page 6-28
MODE ADJUST
OR
Discr
OR
Option/Parameter Default Setting Possible Settings
CENTER MIX +0dB –25 to +5dB
SURROUND MIX +0dB –5 to +5dB
CNTR DLY SAMPLES +0 –127 to +127
MASTER LEVEL +0dB –5 to +5dB
LFE MIX +0.0dB –20.0 to +0.0dB
ES DECODING AUTO AUTO, ON, OFF
SUB LEVEL +0dB OFF, –30 to +12dB
CUSTOM Refer to page 6-28
2-CHAN
MODE ADJUST
OR
2-CHAN
To Next Page
Loading...
Need help?
General