194
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
5. MAINTENANCE
CLEANING
Unplug before any cleaning work. Keep this charger free of debris and dirt. Wipe down the equipment with a
cloth and/or compressed air. It is highly suggested that you clean the device after every use.
STORAGE
Keep the charger clean and clear of debris.
Do not allow foreign material to get into the recessed cavity or onto the contacts. Wipe the charger clean
with a dry cloth. Do not use solvents or water, and do not place the charger in wet conditions.
• Unplug the charger when there is no battery in it.
• Charge the battery before placing it in storage.
• Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger in
direct sunlight or in damp conditions. Do not charge outside. Recharge at room temperature. If the battery is
hot, allow it to cool down before recharging.
Disconnect the power supply before maintenance or cleaning.
Repairs should only be carried out by qualied persons and using genuine spare parts. Inappropriate
repairing could cause signicant danger.
Always use bulbs according to specications listed in this manual.
To maximize the life of the battery, Fully charge before storage.
• After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
• Do not store the battery pack on the tool.
• Store the battery in a clean, dry place. Cover it in order to provide added protection.
TRANSPORTATION
Disconnect the power supply before transportation, and place the charger into a box avoid being exposed to
sunlight during the transportation.
Allowed temperature range is between -4°C and 50°C during the transportation.
Protect the charger from any heavy impact or strong vibrations which may occur during the transportation
in vehicles.
WARNING: The use of any accessory not specied in this manual may present a risk of personal injury.
WARNING: Shorting the battery terminals together may cause burns or a re.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a connection from one terminal to another.
To Next Page
Loading...
Need help?
General