1
2
3
4
5 6
7
8
9
10
11
Press To
1 Setup
Access the setup menu and change printer settings.
Note: The Copy, Scan, and Photo button lights are off when this button is selected.
2 Address Book
Access fax numbers from a saved list of numbers.
3 Redial/Pause
In Fax mode:
• Insert a three-second pause in the number to be dialed to wait for an outside line or get
through an automated answering system. Enter a pause only when you have already
begun entering the number.
• Display the last number dialed. Press the arrow buttons to view the last five numbers
dialed.
4 Dialtone
Dial the telephone number manually using the keypad before sending the fax.
5 Keypad
In Copy mode or Photo mode: Enter the number of copies or prints you want to make.
In Fax mode:
• Enter fax numbers.
• Navigate an automated answering system.
• Select letters when creating a Speed Dial list.
• Type numbers to enter or edit the date and time shown on the display.
6
Display View:
• Printer status
• Messages
• Menus
Notes:
• The display times out after two minutes of inactivity. Press any button to restore the
display.
• The display is turned off in Power Saver mode.
7
Access the photo menu and print photos.
8
Access the fax menu and send faxes.
9
Access the scan menu and scan documents.
Setting up the printer
24
To Next Page
Loading...
