EasyManua.ls Logo

Lexmark 5600 Series - Resetting to Factory Settings

Lexmark 5600 Series
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ordering paper and other supplies
To purchase supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark PerfectFinish
Photo Paper and Lexmark print cartridges.
Item Description
Lexmark Photo Paper
Letter
A4
4 x 6 in.
10 x 15 cm
Lexmark PerfectFinish Photo Paper
Letter
A4
4 x 6 in.
10 x 15 cm
L
USB cable Part number 1021294
Resetting to factory settings
Resetting all settings
You can reset your printer to the original settings without using the printer menus.
Note: Resetting to factory default settings will delete all the printer settings you have previously selected.
1 Turn off the printer.
Note: Make sure the printer is not in Power Saver mode. Press and hold
for 2 seconds to turn off the printer.
If you have set the Power Saver timeout in the Setup menu, press and hold according to the time you set in
the menu.
2 From the printer control panel, press and hold and , and then press to turn the printer on.
Resetting menu settings
1 From the printer control panel, press .
2 Press the arrow buttons until Defaults appears, and then press .
3 Press the arrow buttons until Set Defaults appears, and then press .
4 Press the arrow buttons until Use Factory appears, and then press .
5 Press the arrow buttons to select a language, and then press .
6 Press the arrow buttons to select a country or region, and then press .
7 Use the keypad to enter the month, day, and year, and then press .
Maintaining the printer
119

Table of Contents

Related product manuals