12 Insert the new pick tires.
13 Return the printer to its original position, and then insert the waste toner bottle.
14 Insert the tray.
15 Open the front door, and then firmly push it down.
16 Pull out the print cartridge tray.
17 Remove the paper, and then insert the print cartridge tray.
18 Close the front door.
19 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
20 Turn on the printer.
Resetting the supply usage counters
1 From the control panel, navigate to:
Settings > Device > Maintenance > Config Menu > Supply Usage And Counters
For non-touch-screen printer models, press
to navigate through the settings.
2 Select the supply counter that you want to reset.
Maintain the printer 86
To Next Page
Loading...
