Lexmark C770 - User Manual

112 pages

To Next Page

To Next Page

Loading...

C770, C772

User’s Guide

March 2006

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,

registered in the United States and/or other countries.

© 2006 Lexmark International, Inc.

740 West New Circle Road

Lexington, Kentucky 40550

Table of Contents

Other manuals for Lexmark C770

Connection Guide25 pages

Questions and Answers:

E
Elizabeth Brandt DDSAug 20, 2025
What to do if jobs do not print on my Lexmark C770?
- A
  angelica33Aug 20, 2025
  If jobs are not printing on your Lexmark Printer, ensure that 'Ready' or 'Power Saver' is displayed before sending a print job. If not, press the button to return the printer to the 'Ready' state. Also, if the output bin is full, remove the stack of paper, and then press the button. If the tray is empty, load paper into it. Check that you're using the correct printer driver associated with the Lexmark C770, C772. If using a USB port, ensure you're running a compatible operating system and driver. Verify that you have properly configured the printer for network printing. Also, make sure you are using a recommended interface cable and that the connection is secure.
D
Daniel WintersAug 22, 2025
Why does my Lexmark C770 paper frequently jam?
- J
  Jasmine FinleyAug 22, 2025
  If paper frequently jams in your Lexmark Printer, use recommended paper and specialty media. Ensure the paper stack does not exceed the maximum height indicated on the tray or multipurpose feeder. Adjust the guides in the tray to fit the paper size correctly. Load paper from a fresh package and store paper in its original wrapper to avoid moisture absorption.
P
Paul DavisAug 25, 2025
What to do if held jobs do not print on Lexmark C770?
- S
  Shannon ComptonAug 25, 2025
  If held jobs do not print on your Lexmark Printer, a formatting error may have occurred, or the printer has received invalid data. You can try to print the job (knowing that only part of it may print), delete the job, or free up additional printer memory by deleting other jobs sent to the printer.
K
karen03Aug 26, 2025
Why does my Lexmark C770 feed blank pages into the output bin?
- L
  lori91Aug 26, 2025
  If blank pages feed into the output bin of your Lexmark Printer, ensure the correct media type is loaded in the tray being printed from. Either load the correct media type or change the Paper Type setting to match the loaded media.
M
Madison DanielsAug 28, 2025
What to do if the Paper Jam message remains after removing the jammed paper from my Lexmark C770 Printer?
- K
  Katrina MooreAug 28, 2025
  If the Paper Jam message remains on your Lexmark Printer after removing the jammed paper, ensure you have cleared paper from the entire paper path, and then press the button.
S
Shelly BridgesAug 29, 2025
Why does my Lexmark C770 print from the wrong tray?
- A
  Amber KingAug 29, 2025
  If your Lexmark Printer prints jobs from the wrong tray or on the wrong paper, ensure the Paper Size and Paper Type specified in the printer driver match the paper size and type in the tray and what is set on the printer's operator panel.
B
Bobby HughesAug 31, 2025
Why the page that jammed does not reprint after I clear the jam on my Lexmark Printer?
- P
  Paula WeaverSep 1, 2025
  If the page that jammed does not reprint after you clear the jam on your Lexmark Printer, set Jam Recovery to Auto or On in the Setup Menu/ Print Recovery section.
L
Lucas MartinSep 3, 2025
What to do if paper jams before reaching the mailbox on my Lexmark Printer?
- R
  Robert JonesSep 3, 2025
  If paper jams before reaching the mailbox on your Lexmark Printer, realign the mailbox and the printer. Also, check the electrical connection to the mailbox.
D
Daniel YatesSep 4, 2025
What to do if the operator panel display is blank on my Lexmark C770?
- J
  Jason WhiteSep 5, 2025
  If the operator panel display of your Lexmark Printer is blank or displays only diamonds, turn the printer off, wait about 10 seconds, and turn it back on. If the messages do not appear, turn the printer off and call for service.
S
Sarah ArcherSep 7, 2025
Why does my Lexmark C770 Printer print incorrect characters?
- J
  Jared OconnorSep 7, 2025
  If incorrect characters are printing from your Lexmark Printer, and you are using a parallel interface, ensure you are using an IEEE 1284-compliant parallel cable. If 'Ready. Hex Trace' appears on the display, turn the printer off and back on to exit Hex Trace mode before printing.

Lexmark C770 Specifications

General

Print Resolution	1200 x 1200 dpi
Printer Type	Laser
Connectivity	Ethernet, USB
Operating Systems Supported	Windows, macOS, Linux
Toner Cartridges	Cyan, Magenta, Yellow, Black
Media Type	Cardstock, Envelopes
Media Size	Letter, Legal, Executive, A4, A5, Envelope

Related product manuals

Preview: Lexmark C792

Preview: Lexmark C746

Preview: Lexmark C746n

Preview: Lexmark C734dn

Preview: Lexmark C792 series

Lexmark C792 series