Removing memory and option cards
21
Installing and removing options
Removing a hard disk
Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you
touch a disk.
1 Remove the system board access cover. For more information, see Accessing the printer system board.
2 Locate the hard disk.
3 Gently pull the three posts on the hard disk mounting plate out of the holes on the system board.
4 Gently pull the ribbon cable connector out of the connector on the system board.
5 Place the disk in its original packaging, or wrap the disk in paper and store it in a box.
6 Replace the system board access cover. For more information, see Reinstalling the system board access
cover.
To Next Page
Loading...
