Lexmark C746 - Page 3

5 Load the paper stack with the recommended printable side faceup.
Notes:
• When loading preprinted letterhead for one‑sided printing, place the header faceup toward the front of the tray.
• When loading preprinted letterhead for two‑sided printing, place the header facedown toward the rear of the tray.
One‑sided printing Two‑sided printing
LETTERHEAD
LETTERHEAD
Note: Make sure paper does not exceed the maximum fill indicator located on the left side of the tray.
Warning—Potential Damage: Overloading the tray can cause paper jams and possible printer damage.
6 Insert the tray.
Note: For some paper sizes, the tray will extend past the back of the printer.
7 From the printer control panel, verify the paper size and paper type setting for the tray based on the paper you loaded.
Note: Paper jams may occur if the paper size and type settings selected do not match the paper loaded.
Printing guide
Page 3 of 4