Lexmark C746 - Quick Reference Manual

Quick Reference
Using the non-touch-screen
printer model
Learning about the printer
Using the four-arrow-button printer control
panel
1
3
4
5
6
8
7
910
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQR
8
STU
9
WXYZ
0
2
Use the To
1 Display View the printer status.
Allow printer setup and operation.
2 Select
button
Submit changes made in the printer settings.
3 Arrow
buttons
Scroll up and down, or left and right.
4 Keypad Enter numbers, letters, or symbols.
Use the To
5 Sleep
button
Enable Sleep mode.
The following are the statuses based on the
indicator light and the Sleep button:
• Entering or waking from Sleep mode
– The indicator light is illuminated solid
green.
– The Sleep button is unilluminated.
• Operating in Sleep mode
– The indicator light is illuminated solid
green.
– The Sleep button is illuminated solid
amber.
• Entering or waking from Hibernate mode
– The indicator light is illuminated solid
green.
– The Sleep button is illuminated blinking
amber.
• Operating in Hibernate mode
– The indicator light is unilluminated.
– The Sleep button is blinking amber for 0.1
second, and then goes completely
unilluminated for 1.9 seconds in pulsing
pattern.
The following actions wake the printer from Sleep
mode:
• Pressing any hard button
• Opening Tray 1 or loading paper in the
multipurpose feeder
• Opening a door or cover
• Sending a print job from the computer
• Performing a power‑on reset with the main
power switch
• Attaching a device to a USB port
6 Stop or
Cancel
button
Stop all printer activity.
Note: A list of options is displayed once
Stopped appears on the display.
7 Back
button
Return to the previous screen.
8 Home
button
Go to the home screen.
Use the To
9 Indicator
light
Check the status of the printer.
• Off—The printer is off.
• Blinking green—The printer is warming up,
processing data, or printing.
• Solid green—The printer is on, but idle.
• Blinking red—The printer requires operator
intervention.
10 USB port Connect a flash drive to the printer.
Loading paper and specialty media
Setting the paper size and type
1 From the printer control panel, navigate to:
> Settings > > Paper Menu > > Paper
Size/Type >
2 Press the up or down arrow button to select the paper tray or
feeder, and then press
.
3 Press the up or down arrow button to select the paper size, and
then press
.
4 Press the up or down arrow button to select the paper type, and
then press
to change the settings.
1