4 Squeeze and slide the secondary length guide to the correct
position for the paper size you are loading.
1
2
5 F le x t he she et s back and fort h to loo sen th em . Do not fold or cre as e
the paper. Straighten the edges on a level surface.
6 Load the paper stack with the recommended printable side faceup.
Notes:
• Load envelopes with the stamp side entering the printer
first.
• Make sure the paper does not exceed the maximum paper
fill indicator located on the side of the width guide.
Warning—Potential Damage: Overloading the tray can cause
paper jams and possible printer damage.
7 Insert the tray.
8 From the printer control panel, verify the paper size and paper type
setting for the tray based on the paper you loaded.
Note: Return the secondary length guide back to its original position
when loading long papers such as legal, letter, and A4. Squeeze and
slide the guide until it clicks into place.
Loading the 2,000‑sheet high‑capacity feeder
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until
needed.
1 Pull the tray out.
2 Pull up and slide the width guide to the correct position for the
paper size you are loading.
5
To Next Page
Loading...
