Paper jam inside the top access cover
1 Open the front door.
Warning—Potential Damage: To avoid overexposing the
photoconductors, do not leave the front doors open for more
than 10 minutes.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2 Open the printer top access cover.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Close the printer top access cover, and then close the front door.
5 Depending on your printer model, touch Continue, jam cleared or
press
.
24x paper jam
Paper jam in Tray 1
1 Open Tray 1.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close Tray 1.
4 Depending on your printer model, touch Continue, jam cleared or
press
.
Paper jam in one of the optional trays
1 Open the specified tray.
2 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close the tray.
4 Depending on your printer model, touch Continue, jam cleared or
press
.
250 paper jam
1 Press the paper release lever, and then remove any jammed pages
from the multipurpose feeder.
1
2
Note: Make sure all paper fragments are removed.
2 Load new paper into the multipurpose feeder.
3 Depending on your printer model, touch Continue, jam cleared or
press
.
27
To Previous Page
Loading...
