Lexmark C792 Maintenance Guide

• Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
• Disconnect all cords and cables from the printer before moving it.
• Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same
time.
Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.
Moving the printer to another location
The printer and options can be safely moved to another location by following these precautions:
• Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart
used to move the options must have a surface able to support the dimensions of the options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Maintaining the printer
12

Lexmark C792 Specifications

General

Print Technology	Color Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Processor Speed	1.2 GHz
Monthly Duty Cycle	Up to 150, 000 pages
Connectivity	Ethernet, USB 2.0
Display	Color Touch Screen
Recommended Monthly Volume	2, 000 to 15, 000 pages
Input Capacity	650 pages (Standard)
Output Capacity	500 pages
Interface	USB 2.0
Supported Operating Systems	Windows, macOS, Linux
Hard Drive	Optional
First Print Out Time B/W	8.5 seconds
Media Type	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes	A4, A5, A6, Legal, Letter, Executive