Paper size and dimension Standard
250‑sheet tray
Manual
feeder
650‑sheet duo tray 550‑sheet
tray
Duplex
mode
550‑sheet tray Multipurpose
feeder
Statement
140 x 216 mm (5.5 x 8.5 in.)
X X
1
XX
Universal
76 x 127 mm (3 x 5 in.) to
216 x 356 mm (8.5 x 14 in.)
X
1,3
X
1,3
XX
Universal
148 x 210 mm (5.8 x 8.3 in)
to 216 x 356 mm (8.5 x 14
in).
1,2 1,2 1,2 4
7 3/4 Envelope (Monarch)
98 x 191 mm (3.9 x 7.5 in.)
X X
1
XX
9 Envelope
98 x 225 mm (3.9 x 8.9 in.)
X
X
1
XX
10 Envelope
105 x 241 mm (4.1 x 9.5 in.)
X
X
1
XX
DL Envelope
110 x 220 mm (4.3 x 8.7 in.)
X
X
1
XX
C5 Envelope
162 x 229 mm (6.4 x 9 in.)
X
X
1
XX
B5 Envelope
176 x 250 mm (6.9 x 9.8 in.)
X
X
1
XX
Other Envelope
98 x 162 mm (3.9 x 6.3 in.)
up to 176 x 250 mm
(6.9 x 9.8 in.)
X
X
1
XX
1
The paper source supports paper size without size sensing.
2
Universal is only supported in the standard 250and optional 550sheet tray if the paper size is from 148 x 215.9 mm (5.83 x 8.5 inches)
to 215.9 x 355.6 mm (8.5 x 14 inches).
3
Universal is only supported in the multipurpose feeder and manual feeder if the paper size is from 76.2 x 127 mm (3 x 5 inches) to
215.9 x 359.9 mm (8.5 x 14.17 inches).
4
Universal is only supported in duplex mode if the width is between 210 mm (8.27 inches) and 215.9 mm (8.5 inches) and length is
between 279.4 mm (11 inches) and 355.6 mm (14 inches).
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
• For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label
manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60
percent.
• Store paper in cartons, on a pallet or shelf, rather than on the floor.
Media guide
Page 2 of 4
To Next Page
Loading...
Need help?
General
