7
8
1
2
4
3
6
5
Use the To
1 USB wireless port Attach an optional wireless network adapter.
2 Security lock port Lock the controller board.
3 Printer power cord
socket
Connect the printer to a properly grounded electrical outlet.
4 LINE port Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.
5 EXT port Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if
this connection method is supported in your country or region.
Note: Remove the adapter plug to access the port.
6 Rear USB port Attach a keyboard.
7 USB printer port Connect the printer to a computer using a USB cable.
8 Ethernet port Connect the printer to an Ethernet network.
Additional printer setup 37
To Next Page
Loading...
