To Next Page
D
Debbie WaltersAug 17, 2025
How to resolve 'Scanner jam' on Lexmark Printer?
- Rronald40Aug 18, 2025
To resolve a 'Scanner jam' on your Lexmark printer, remove the jammed paper from the scanner.
How to resolve 'Scanner jam' on Lexmark Printer?
To resolve a 'Scanner jam' on your Lexmark printer, remove the jammed paper from the scanner.
How to fix 'Memory full' error on Lexmark Printer?
To address the 'Memory full' error on your Lexmark printer, you can either touch 'Cancel job' on the printer control panel to clear the message or install additional printer memory.
What to do if my Lexmark Printer says 'Load [paper source] with [paper size]'?
If your Lexmark printer displays the message 'Load [paper source] with [paper size]', load the tray or feeder with the correct size of paper. Then, touch 'Finished loading paper' on the printer control panel. Alternatively, you can cancel the current job.
What to do if Lexmark Printer indicates '[Color] cartridge low [88.xy]'?
If your Lexmark printer indicates a '[Color] cartridge low [88.xy]' message, you may need to order a new toner cartridge. If necessary, touch 'Continue' on the printer control panel to clear the message and continue printing.
What to do when Lexmark Printer displays 'Close door'?
If your Lexmark printer displays the 'Close door' message, make sure the right side cover is installed, and then close the front and top doors to clear the message.
How to fix 'Incompatible tray' error on Lexmark Printer?
To fix an 'Incompatible tray [x] [59]' error on your Lexmark printer, remove and then reinstall the indicated tray to clear the message.
What to do if Lexmark Printer says 'Insert Tray [x]'?
If your Lexmark printer displays the message 'Insert Tray [x]', insert the indicated tray into the printer.
What to do if my Lexmark Printer displays 'Close flatbed cover and load originals if restarting job [2yy.xx]'?
If your Lexmark printer displays the message 'Close flatbed cover and load originals if restarting job [2yy.xx]', you have several options: * Touch 'Scan from automatic feeder' to continue scanning from the ADF immediately after the last successful scan job. * Touch 'Scan from flatbed' to continue scanning from the scanner glass immediately after the last successful scan job. * Touch 'Finish job without further scanning' to end the last successful scan job. * Touch 'Cancel job' to clear the message and cancel the scan job.
What to do when Lexmark Printer displays 'Remove paper from standard output bin'?
If your Lexmark printer displays the message 'Remove paper from standard output bin', remove the paper stack from the standard bin.
How to resolve 'Restore held jobs?' message on Lexmark Printer?
To resolve the 'Restore held jobs?' message on your Lexmark printer, either touch 'Restore' to restore all held jobs stored on the printer's hard disk, or touch 'Do not restore' if you do not want to restore any of the print jobs.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 10.5 s |
| Time to first page (color, normal) | 11.5 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 15 ppm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | copy, fax, print, scan |
| Digital sender | No |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | 85000 pages per month |
| Recommended duty cycle | 1500 - 7000 pages per month |
| Number of print cartridges | 5 |
| Page description languages | Microsoft XPS, PCL 5c, PCL 6, PDF 1.7, PostScript 3, PPDS |
| Copier resize | 25 - 400 % |
| N-in-1 copy function (N=) | 4 |
| Time to first copy (black, normal) | 10.8 s |
| Time to first copy (color, normal) | 11.6 s |
| Copy speed (black, normal quality, A4) | 30 cpm |
| Scanner type | Flatbed & ADF scanner |
| Maximum scan area | 216 x 356 mm |
| Scan speed (color) | 32 ppm |
| Duplex scan speed (color) | 14 ppm |
| Optical scanning resolution | 600 x 1200 DPI |
| Faxing | Color faxing |
| Modem speed | 33.6 Kbit/s |
| Fax transmission speed | 3 sec/page |
| Total input capacity | 251 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 1451 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Paper tray media types | Card stock, Labels, Plain paper, Transparencies |
| Paper tray media weight | 60 - 176 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size) |
| ISO A-series sizes (A0...A9) | A4, A5 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Display | - |
| Control type | Touch |
| Product color | Black, Grey |
| Display diagonal | 7 \ |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | 3 |
| Security algorithms | 802.1x RADIUS, EAP-TLS, EAP-TTLS, LEAP, MD5, PEAP |
| Supported network protocols (IPv4) | TCP/IP, AppleTalk |
| Supported network protocols (IPv6) | TCP/IP, TCP, UDP |
| Internal memory | 1024 MB |
| Processor frequency | 800 MHz |
| Maximum internal memory | 3072 MB |
| Sound power level (standby) | 16 dB |
| Sound pressure level (copying) | 50 dB |
| Sound pressure level (scanning) | 49 dB |
| Sound pressure level (duplex printing) | 52 dB |
| Power consumption (average operating) | - W |
| Package depth | 645 mm |
| Package width | 558 mm |
| Package height | 570 mm |
| Package weight | 32730 g |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Linux operating systems supported | Fedora 14, Fedora 15, RedHat EL Linux 4.0 U5, RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.0, RedHat EL Linux 5.1, RedHat EL Linux 5.2, RedHat EL Linux 5.3, SuSE Linux 10, SuSE Linux 10.2, SuSE Linux 10.3, SuSE Linux 11 |
| Other operating systems supported | Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 589 mm |
|---|---|
| Width | 444 mm |
| Height | 470 mm |
| Weight | 28200 g |
