To Next Page
T
Theresa FrancisSep 5, 2025
What to do if my Lexmark Printer shows 'Incompatible tray [x]'?
- KkennethmannSep 5, 2025
If your Lexmark printer displays 'Incompatible tray [x]', remove and then reinstall the indicated tray to clear the message.
What to do if my Lexmark Printer shows 'Incompatible tray [x]'?
If your Lexmark printer displays 'Incompatible tray [x]', remove and then reinstall the indicated tray to clear the message.
What to do if my Lexmark Printer says 'Waste toner bottle nearly full'?
If your Lexmark printer displays a message indicating that the 'Waste toner bottle nearly full', you may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Lexmark Printer says '[Type] imaging kit low'?
If your Lexmark printer displays a message indicating that the '[Type] imaging kit low', you may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Lexmark Printer says 'Standard USB port disabled'?
If your Lexmark printer displays 'Standard USB port disabled', from the printer control panel, select Continue to clear the message. For non-touch-screen printer models.
What to do if my Lexmark Printer says 'Scanner disabled by admin'?
To address the 'Scanner disabled by admin' message on your Lexmark printer, print without the scanner, or contact your system support person.
What to do if Lexmark Printer says 'Replace all originals if restarting job'?
If your Lexmark printer displays 'Replace all originals if restarting job', from the printer control panel, try one or more of the following: Select Scan from automatic feeder, and then press to continue scanning from the ADF immediately after the last successful scan job. Select Scan from flatbed, and then press to continue scanning from the scanner glass immediately after the last successful scan job. Select Finish job without further scanning, and then press to end the last successful scan job. Select Restart Job, and then press to restart the scan job with the same settings from the previous scan job. Select Cancel Job, and then press to clear the message and cancel the scan job.
How to resolve 'Load Manual Feeder with [custom type name]' on Lexmark Printer?
If your Lexmark printer displays 'Load Manual Feeder with [custom type name]', load the feeder with the correct size and type of paper. Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing. If those steps don't work, cancel the current job.
What to do if my Lexmark Printer says 'SMTP server not set up. Contact system administrator.'?
From the printer control panel, press to clear the message.
How to fix 'Replace missing waste toner bottle' on Lexmark Printer?
To resolve the 'Replace missing waste toner bottle' message on your Lexmark printer, install the missing waste toner bottle to clear the message.
What to do if my Lexmark Printer says 'Remove paper from standard output bin'?
If your Lexmark printer displays the message 'Remove paper from standard output bin', remove the paper stack from the standard bin.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 11.5 s |
| Time to first page (color, normal) | 12.5 s |
| Print speed (black, normal quality, A4/US Letter) | 23 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 12 ppm |
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | copy, print, scan |
| Digital sender | No |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | 60000 pages per month |
| Recommended duty cycle | 500 - 5000 pages per month |
| Number of print cartridges | 5 |
| Page description languages | Microsoft XPS, PCL 5c, PCL 6, PDF 1.7, PostScript 3, PPDS |
| Copier resize | 25 - 400 % |
| Copy speed (black, normal quality, A4) | 23 cpm |
| Scanner type | Flatbed & ADF scanner |
| Maximum scan area | 216 x 356 mm |
| Scan speed (color) | 32 ppm |
| Optical scanning resolution | 600 x 1200 DPI |
| Total input capacity | 251 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 901 sheets |
| Total number of input trays | 1 |
| Maximum number of input trays | 3 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Paper tray media types | Card stock, Labels, Plain paper, Transparencies |
| Paper tray media weight | 60 - 176 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size) |
| ISO A-series sizes (A0...A9) | A4, A5 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Display | LCD |
| Product color | Black, Grey |
| Display diagonal | 2.4 \ |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Supported network protocols (IPv4) | TCP/IP IPv4, AppleTalk |
| Supported network protocols (IPv6) | TCP/IP IPv6, TCP, UDP |
| Internal memory | 512 MB |
| Processor frequency | 800 MHz |
| Maximum internal memory | 2560 MB |
| Sound power level (standby) | 16 dB |
| Sound pressure level (copying) | 48 dB |
| Sound pressure level (printing) | 47 dB |
| Sound pressure level (scanning) | 49 dB |
| Sound pressure level (duplex printing) | 50 dB |
| Power consumption (average operating) | - W |
| Package depth | 594 mm |
| Package height | 567 mm |
| Package weight | 31430 g |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Linux operating systems supported | Fedora 14, Fedora 15, RedHat EL Linux 4.0 U5, RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.0, RedHat EL Linux 5.1, RedHat EL Linux 5.2, RedHat EL Linux 5.3, SuSE Linux 10, SuSE Linux 10.2, SuSE Linux 10.3, SuSE Linux 11 |
| Other operating systems supported | Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
Weight and Dimensions| Depth | 558 mm |
|---|---|
| Width | 444 mm |
| Height | 470 mm |
| Weight | 27390 g |
