Lexmark CX310dn - 1 Xx Service Error Messages

• “Network service check” on page 109
1xx service error messages
Error code Description Action
110.xx
Service <color> Printhead
The printhead <color> error
• Perform a POR.
• If the problem persists, then see “110.xx
Printhead service check” on page 82
110.01
Service <color> Printhead
he printhead <color> lost HSYNC
110.02
Service <color> Printhead
The printhead <color> failed to complete servo.
110.03
Service <color> Printhead
The printhead <color> mirror motors lost motor
lock.
110.04
Service <color> Printhead
The printhead <color> mirror motors lost motor
lock.
110.05
Service <color> Printhead
Failure reading NVRAM from printhead
110.06
Service <color> Printhead
The printhead <color> thermistor is open.
110.07
Service <color> Printhead
The printhead <color> thermistor is shorted.
110.08
Service <color> Printhead
The printhead <color> laser showed bad in
testing.
110.09
Service <color> Printhead
The printhead <color> SOS EOS measurement did
not complete.
110.10
Service <color> Printhead
The printhead <color> has bad SOS EOS
measurement.
110.11
Service <color> Printhead
Failure writing data to the printhead.
110.12
Service <color> Printhead
Failure reading data from the printhead.
110.13
Service <color> Printhead
Printhead declared error.
121.xx
Service Fuser Error
Fuser error See “121.xx Fuser service check” on
page 83.
121.01
Service Fuser Error
Attempting to print with estimated power at or
below minimum power.
7527
Diagnostic information
76