Parts catalog
• “Legend” on page 326
• “Assembly 1: Covers” on page 327
• “Assembly 2: Scanner” on page 329
• “Assembly 3: Paperpath” on page 331
• “Assembly 4: Operator panels” on page 335
• “Assembly 5: Electronics” on page 339
• “Assembly 6: Cables and sensors” on page 343
• “Assembly 7: Media drawers and trays” on page 345
• “Assembly 8: Options and miscellaneous” on page 347
• “Screw and retainer identification table” on page 348
Legend
The following column headings are used in the parts catalog:
• Asm‑index—Identifies the assembly and the item in the diagram. For example, 3‑1 indicates Assembly 3 and item
1 in the table.
• Part number—Identifies the unique number that correlates with the part.
• Units/mach—Refers to the number of units actually used in the base machine or product.
• Units/option—Refers to the number of units in a particular option.
• Units/FRU—Refers to the number of units in a particular FRU.
• Description—A brief description of the part.
The following abbreviations are used in the parts catalog:
• NS (not shown) in the Asm‑index column indicates that the part is procurable but is not pictured in the illustration.
• PP (parts packet) in the Description column indicates that the part is contained in a parts packet.
7527
Parts catalog
326
To Next Page
Loading...
