• Additional debug information in some cases
The printed event log can be faxed to your next level of support for verification or diagnosis.
To print the event log:
1 Select Event Log from Diag Menu, and press Select .
2 Select Print Log, and press Select.
3 Press Back to return to Event Log.
Clear Log
Use Clear Log to remove the current information in the Event Log. This affects both the viewed log and the printed log
information.
To clear the even log:
1 Select Event Log from Diag Menu, and press Select .
2 Select Clear Log, and press Select.
3 Select YES to clear the Event Log or NO to exit the Clear Log menu. If YES is selected, the Deleting EVENT
LOG displays on the screen.
4 Press Back to return to Event Log.
Scanner tests
• “ASIC test” on page 184
• “Motor tests” on page 184
• “Feed test” on page 185
7527
Service menus
183
To Next Page
Loading...
