Appendix A: Printer specifications
• “Power specifications” on page 351
• “Electrical specifications” on page 351
• “Operating clearances for CX310 models” on page 352
• “Operating clearances for CX410 and CX510 models” on page 353
• “Acoustics” on page 353
• “Environment” on page 354
• “Processor” on page 354
Power specifications
The average nominal power requirements for the base printer configuration are shown in the following table (power
levels are shown in watts):
Note: Some modes may not apply to all models.
Printing states Power
Off 0.0W
Sleep Mode 7W
Hibernate Mode 1W
Standby Mode 50W
Ready Mode 40W
Simplex printing 500W
Duplex printing 550W
Maximum current shown in amp ergs.
Notes:
• Using a power converter or inverter is not recommended.
• The CX310, CX410, and CX510 models are ENERGY STAR Qualified.
• All models ship with Sleep Mode set to On.
Electrical specifications
Low-voltage models
• 100 to 127 V ac at 50 to 60 hertz (Hz) nominal
• 90 to 137 V ac, extreme
High-voltage models
• 220 to 240 V ac at 50 to 60 hertz (Hz) nominal (not available in all countries and regions)
7527
Appendix A: Printer specifications
351
To Next Page
Loading...
