• “Color Trapping” on page 191
• “Reports” on page 192
• “Panel Menus” on page 192
• “PPDS Emulation” on page 192
• “Download emuls” on page 192
• “Safe Mode” on page 192
• “Demo Mode” on page 193
• “Factory Defaults” on page 193
• “Energy Conserve” on page 194
• “Fax low power support” on page 194
• “Min copy memory” on page 194
• “Num pad job assist” on page 194
• “Format fax storage” on page 194
• “Flatbed edge erase” on page 195
• “Scanner manual registration” on page 195
• “Disable scanner” on page 196
• “Auto Color Adjustment” on page 196
• “Font Sharpening” on page 197
• “Exit Config” on page 197
Entering configuration mode
The Configuration Menu group contains a set of menus, settings, and operations which are infrequently required by a
user. Generally, the options made available in this menu group are used to configure a printer for operation.
1 Turn off the printer.
2 Press and hold the 2 and 6 buttons.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
Available tests
The tests display on the operator panel in the order shown for all models.
Configuration menu
Print Quality Pages See “Print Quality Pages” on page 191.
Color Trapping See “Color Trapping” on page 191.
Reports
Menu Settings Page See “Reports” on page 192
Event Log
Panel Menus See “Panel Menus” on page 192.
7527
Service menus
189
To Next Page
Loading...
