Lexmark E210 User Manual (English)

Other manuals for Lexmark E210

User Guide137 pages

Specifications2 pages

Service Manual74 pages

Questions and Answers:

R
rodneyhillJul 26, 2025
Why Lexmark E210 Printer is not printing?
- N
  nathan38Jul 26, 2025
  Your Lexmark printer might not be printing due to several reasons. First, ensure the printer is receiving power by checking the power cord connections, power switch, and power source. Also, make sure that Lexmark E210 is selected as your default printer. Other things to check: the printer cover is closed, there are no media jams, print media is loaded, and the print cartridge is installed. If the printer is in manual feed mode, add print media to the manual input tray and press the button on the printer control panel. Finally, ensure the connection cable between the computer and printer is properly connected and not defective. If the port setting is incorrect, check the Windows printer setting to make sure that the print job is sent to the correct port.
Z
zmyersJul 29, 2025
How to fix Lexmark Printer media keeps jamming?
- Q
  qharrisJul 29, 2025
  If the print media keeps jamming in your Lexmark printer, there might be too much print media in the tray. Remove excess print media. If you are printing special media, use the manual input tray. Ensure you are using the correct type of print media that meets the printer's specifications. Also, verify that you are using the correct output method; for example, thick paper should be printed using the face-up output slot instead of the face-down output slot. Finally, check for and remove any debris inside the machine by opening the front cover.
D
David BrownAug 3, 2025
What to do if Lexmark Printer prints totally blank pages?
- M
  Mr. Matthew RichardsAug 3, 2025
  If your Lexmark printer is printing totally blank pages, the print cartridge may be defective or out of toner; consider replacing it. Also, check the file to ensure it does not contain blank pages. For defective parts, such as the controller and the board, contact a service representative.
B
Bobby HarrisAug 8, 2025
What to do if Lexmark Printer prints, but the text is wrong, garbled or incomplete?
- J
  Joseph BakerAug 8, 2025
  If your Lexmark printer is printing wrong, garbled, or incomplete text, the printer cable might be loose or defective. Try disconnecting and reconnecting it. You can also test with a previous print job that printed correctly. If possible, try attaching the cable and printer to another computer. If the issue persists, replace the printer cable. Also, verify that the correct printer driver is selected in the application's printer selection menu.
O
owarnerAug 12, 2025
How to resolve Lexmark E210 Printer system error - Fuser or LSU error?
- N
  Nichole SteeleAug 12, 2025
  To resolve a Fuser or LSU error on your Lexmark printer, reset the printer by briefly turning it off and back on again. If the error persists, contact a service representative.
A
Adriana HornAug 16, 2025
Why half of the page is blank on Lexmark Printer?
- L
  Laura RobbinsAug 16, 2025
  If half of the page is blank when printing with your Lexmark printer, the page layout may be too complex. Simplify the page layout and remove any unnecessary graphics if possible. Also, the page orientation setting may be incorrect; change the page orientation in your application. Finally, ensure that the print media size and size settings match, verifying that the size in the print settings matches the print media size loaded in the input tray.
J
James HernandezAug 20, 2025
What if Lexmark Printer prints, but the text is wrong, garbled or incomplete? (continued)
- A
  Aaron LopezAug 20, 2025
  If your Lexmark printer is printing wrong, garbled, or incomplete text, the software application may be malfunctioning. Try printing from another application to see if the issue persists.