Installing Software from Diskettes
2.17
5
Click Copy all disk images.
If you want to copy a portion of the selected
component, select the disk you want to copy in the
Disk Images window, and then click Copy Selected
disk image.
6
When prompted, insert a blank, formatted diskette
into the floppy drive, and click Yes to copy the first
diskette. For multiple diskettes, when the first diskette
is finished, you are prompted to insert disk 2.
Make sure you label each diskette in order as you
create it: Lexmark E210 driver, disk 1 of 2, and so
on.
7
If you have more than one disk, insert the next disk
and click Yes.
8
When copying to diskettes is complete, click Close in
the Copy to Floppy dialog box. Then, click Exit in the
Lexmark printer dialog box.
SETTING UP YOUR PRINTER
To Next Page
Loading...
