Using the operator panel
65
Replace photoconductor kit (printer hard stop)
Unsupported toner cartridge / Toner cartridge is not installed
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blink
• Error—Blink
What this light sequence means:
The photoconductor kit’s drum is full and needs replacing. The printer
will not print any more pages until the photoconductor kit is replaced.
What you can do:
Replace the photoconductor kit. (See “How to change a
photoconductor kit” on page 112 for help.)
Light sequence:
• Toner Low/Replace PC Kit—On
• Error—On
What this light sequence means:
The toner cartridge is not installed, or the printer detects a toner
cartridge error.
What you can do:
• If the toner cartridge is not installed, install it.
• If the toner cartridge is installed, remove it and install a new
toner cartridge (see “How to change a toner cartridge” on
page 108).
To Next Page
Loading...
