14
Micro
↓
Feed the paper downward in:
• 1/72-inch increments (2480/2481 models)
• 1/90-inch increments (2490/2491 models)
If you press and hold
Micro
↓, the paper
advances in micro movements and then goes into
continuous feed.
Use
Micro
↓ to adjust the Top-Of-Form.
Setup
Enter Setup mode. You can change the default
values and modes for printer operation.
Pitch
Note:
• Repeatedly pressing
Pitch
rotates through
the printer pitch
selections. If you
continue pressing
Pitch
through a
second pass, the pitch
selections are locked.
• This setting will be lost
when the printer is
powered
Off
and back
On
.
Set the character pitch to: 10 cpi, 12 cpi, 15 cpi,
17 cpi, 20 cpi, or Proportional Spacing.
Note:
• On 2490/2491 models you can also select 24 cpi.
• Fast Draft supports only 10, 12, and 15 pitch.
Note:
Some functions may not work when data is being processed and the
printer is online (Ready light is
On
).
Press this button: When you want to…
To Next Page
Loading...
