1 Top 15 2 mm (6 i n .)
2 Right side 152 mm (6 in.)
3 Front 406 mm (16 in.)
Note: The minimum space needed in front of the printer is 75 mm (3 in.)
4 Left side 152 mm (6 in.)
5 Rear 152 mm (6 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding optional 250‑, 550‑, or 2100‑sheet trays. For more information, see
“Installing the 250‑ or 550‑sheet tray” on page 285 or “Installing the 2100‑sheet tray” on page 286.
Learning about the printer 13
To Next Page
Loading...
