Lexmark MB3442adw - Page 126

Menu item Description
Reserve Job Expiration
O*
1 Hour
4 Hours
24 Hours
1 Week
Set the expiration time that the printer stores print jobs for printing later.
Require All Jobs to be Held
O*
On
Set the printer to hold all print jobs.
Keep duplicate documents
O*
On
Allow the storage of documents with the same file name.
Note: An asterisk (*) next to a value indicates the factory default setting.
Erase Temporary Data Files
Menu item Description
Stored in onboard memory
O*
On
Delete all files stored on the printer memory.
Note: An asterisk (*) next to a value indicates the factory default setting.
Miscellaneous
Menu item Description
Print Permission
O*
On
Allow the user to print.
Default Print Permission Login Shows the default permission used for the user to print.
Note: This setting shows only when one or more Login Methods are created.
Security Reset Jumper
Enable “Guest” access*
No Eect
Specify user access to the printer.
Notes:
• The jumper is located beside a lock icon on the controller board.
• Enable “Guest” access gives anyone access to all aspects of the printer.
• No Eect may make access to the printer impossible when the required
security information is unavailable.
Minimum Password Length
0–32
Specify the password length.
Enable Password/PIN Reveal Show the password or personal identification number.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 126