What does 'Supply needed to complete job' mean on Lexmark MX410 All in One Printer?
To resolve this issue on your Lexmark All in One Printer, install the missing supply to complete the job, or cancel the current job.
What to do if my Lexmark All in One Printer has a scanner jam?
To fix a scanner jam on your Lexmark All in One Printer, remove the jammed paper from the scanner.
How to clear 'Cartridge low' message on Lexmark MX410?
Your Lexmark All in One Printer indicates that the toner cartridge is low. You may need to order a new toner cartridge. If you wish to continue printing, select Continue on the printer control panel to clear the message.
What does 'Too many trays attached' mean on Lexmark All in One Printer?
To resolve this issue on your Lexmark All in One Printer: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra trays. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.
What does 'Insufficient memory to collate job' mean on Lexmark MX410 All in One Printer?
To address this issue with your Lexmark All in One Printer, select Continue on the printer control panel to print the part of the job already stored and begin collating the rest of the print job. Alternatively, cancel the current print job.
What does 'Fax server not set up' mean on Lexmark All in One Printer?
To resolve this issue with your Lexmark All in One Printer, select Continue on the printer control panel to clear the message. Complete the Fax Server setup.
How to load manual feeder on Lexmark MX410 All in One Printer?
To solve this problem with your Lexmark All in One Printer, load the multipurpose feeder with the correct size of paper. Depending on your printer model, you can also touch Continue or press to clear the message and continue printing, or cancel the current job.
Why does my Lexmark MX410 say 'Remove paper from standard output bin'?
To resolve this issue with your Lexmark All in One Printer, remove the paper stack from the standard bin. The printer should automatically detect the removal and resume printing. If the message persists, select Continue on the printer control panel.
What does 'Fax Station Name not set up' mean on Lexmark All in One Printer?
To resolve this issue with your Lexmark All in One Printer, select Continue on the printer control panel to clear the message. Complete the Analog Fax Setup.
What to do when Lexmark MX410 All in One Printer says 'Imaging unit very low'?
Your Lexmark All in One Printer indicates that the imaging unit is very low and may need replacement soon. Select Continue on the printer control panel to clear the message and continue printing.
Guide on how to access and use the printer's web-based interface for configuration.
Details on installing memory cards, fonts, firmware cards, and other internal components.
Instructions for installing physical hardware options like trays and network adapters.
Steps for installing the necessary printer drivers and software on your computer.
Step-by-step guide for connecting the printer to an Ethernet network.
Instructions on how to perform basic copying tasks using the printer.
Configuration steps to enable and set up the printer's email functionality.
Initial setup and connection procedures for using the printer's fax capabilities.
Instructions for scanning documents directly to network folders.
Steps for scanning documents to a File Transfer Protocol (FTP) server.
Procedures for securely erasing device settings and data from the printer.
Tips and procedures to prevent paper jams in the printer.
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 40 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Scan Type | Flatbed, ADF |
| ADF Capacity | 50 sheets |
| Duplex Printing | Yes |
| Standard Memory | 256 MB |
| Display | 2.4-inch color LCD |
| Functions | Print, Copy, Scan, Fax |
| Max Copying Speed | Up to 40 cpm |
| Max Copying Resolution | 600 x 600 dpi |
| Max Printing Speed | Up to 40 ppm |
| Optical Resolution | 1200 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Processor Speed | 800 MHz |
| Operating System Compatibility | Windows, Mac, Linux |
| Connectivity | USB, Ethernet |
| Paper Capacity | 250 sheets |
| Mobile Printing | Yes |
To Next Page
