What does 'Replace unsupported cartridge [32.xy]' mean on Lexmark MX310dn All in One Printer?
This message indicates that you need to remove the current toner cartridge and install a supported one to clear the message and continue printing.
What to do if my Lexmark MX310dn All in One Printer says 'Incorrect paper size, open [paper source] [34]'?
If your Lexmark All in One Printer displays an 'Incorrect paper size' message, load the correct size of paper in the paper source. Also, ensure the length and width guides are correctly adjusted. Verify the paper size and type settings in Printing Preferences, the Print dialog, and the Paper menu on the printer control panel. Make sure that the paper size is correctly set. If needed, select 'Continue' to print using a different paper source or cancel the print job.
Why does my Lexmark MX310dn All in One Printer say 'Load [paper source] with [paper size] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size of paper into the specified tray or feeder. After loading the correct paper size, select 'Finished loading paper' on the printer control panel to proceed.
What to do if Lexmark MX310dn All in One Printer displays 'Fax server 'To Format' not set up. Contact system administrator.'?
Select 'Continue' from the printer control panel to clear the message. Complete the Fax Server setup.
What to do if Lexmark MX310dn All in One Printer displays 'The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.'?
Select 'Continue' to clear the message.
What does 'Scanner automatic feeder cover open' mean on Lexmark MX310dn All in One Printer?
This message indicates that you need to close the ADF cover on the Lexmark All in One Printer.
What does 'Non?Lexmark [supply type], see User’s Guide [33.xy]' mean on my Lexmark MX310dn All in One Printer?
This message indicates that the Lexmark All in One Printer has detected a non?Lexmark supply or part. To proceed with using non-genuine supplies or parts, press and hold the '#' button on the control panel simultaneously for 15 seconds to accept the risks.
What to do if Lexmark All in One Printer prompts 'Change [paper source] to [custom string] load [paper orientation]'?
Load the correct size and type of paper in the tray, then verify that the paper size and type settings are specified in the Paper menu on the printer control panel, and then select 'Finished changing paper'. Alternatively, cancel the print job.
What to do if Lexmark MX310dn All in One Printer displays 'Scanner disabled by admin [840.01]'?
Print without the scanner, or contact your system support person.
Why does my Lexmark All in One Printer say 'Load [paper source] with [custom type name] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size and type of paper into the specified tray or feeder. To use the tray that has the correct size or type of paper, select 'Finished loading paper' on the printer control panel.
Steps to install and configure the printer software on your computer.
Configure your printer to connect to a wired or wireless network.
Detailed instructions on how to print documents from your computer.
Basic steps for making quick copies using the ADF or scanner glass.
Essential setup steps for enabling the printer's e-mail functionality.
Essential initial configuration steps for enabling the fax function.
Learn how to send faxes via the printer control panel or computer.
Information on how to order genuine Lexmark toner cartridges and other supplies.
Step-by-step guides for replacing consumables like toner and imaging units.
How to interpret jam messages and locate jammed paper for removal.
Explanations and solutions for common error and status messages.
Solutions for issues like incorrect characters or poor print quality.
Troubleshooting steps for issues related to the copier function.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | 33 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 14 ppm |
| Finishing option | No |
| All-in-one functions | Copy, Fax, Print, Scan |
| Supported media weight(s) | 60 - 90 g/m² |
| Color all-in-one functions | Scan |
| Package dimensions (W x D x H) | 19.09 x 21.65 x 22.48 \ |
| Supported media weight (imperial) | 24 lbs |
| Country of origin | China |
| Maximum duty cycle | 50000 pages per month |
| Recommended duty cycle | 250 - 6000 pages per month |
| Page description languages | Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS |
| Copier resize | 25 - 400 % |
| Copy speed (black, normal quality, A4) | 33 cpm |
| Scanner type | Flatbed & ADF scanner |
| Maximum scan area | 216 x 356 mm |
| Duplex scan speed (black) | 43 ppm |
| Duplex scan speed (color) | 20 ppm |
| Optical scanning resolution | 600 x 1200 DPI |
| Faxing | Mono faxing |
| Modem speed | 33.6 Kbit/s |
| Fax transmission speed | 3 sec/page |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 850 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 3 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Maximum print size | - |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Display | LCD |
| Display diagonal | 2.4 \ |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | 1 |
| Supported network protocols (IPv4) | TCP/IP, AppleTalk, TCP, UDP |
| Supported network protocols (IPv6) | TCP/IP |
| Internal memory | 256 MB |
| Processor frequency | 800 MHz |
| Sound pressure level (copying) | 54 dB |
| Sound pressure level (printing) | 53 dB |
| Sound pressure level (scanning) | 55 dB |
| Sound pressure level (duplex printing) | 52 dB |
| Power consumption (average operating) | - W |
| Package depth | 550 mm |
| Package width | 485 mm |
| Package height | 571 mm |
| Package weight | 22500 g |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Other operating systems supported | Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Sustainability certificates | ENERGY STAR |
| Certification | Blue Angel (RAL-UZ-122), CAN/CSA-C22.2 60950-1, CSA E60825-1, ICES-003 B, BSMI B, CNS 13438, VCCI B, US FDA, FCC B, UL 60950-1, IEC 320-1, EN/IEC 60320-1, CE B, CB IEC 60950-1, EN 62311, EN 60950-1, EN/IEC 61000-3, EN 55022 B, EN 55024, EN/IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, SMA C-tick B, CCC B, CISPIR 22 B, EK Mark, N Mark, ECMA-370, TED |
Weight and Dimensions| Depth | 472 mm |
|---|---|
| Width | 399 mm |
| Height | 468 mm |
| Weight | 20000 g |
To Next Page
