What does 'Replace unsupported cartridge [32.xy]' mean on Lexmark MX317 All in One Printer?
This message indicates that you need to remove the current toner cartridge and install a supported one to clear the message and continue printing.
What to do if my Lexmark All in One Printer says 'Incorrect paper size, open [paper source] [34]'?
If your Lexmark All in One Printer displays an 'Incorrect paper size' message, load the correct size of paper in the paper source. Also, ensure the length and width guides are correctly adjusted. Verify the paper size and type settings in Printing Preferences, the Print dialog, and the Paper menu on the printer control panel. Make sure that the paper size is correctly set. If needed, select 'Continue' to print using a different paper source or cancel the print job.
Why does my Lexmark MX317 say 'Load [paper source] with [paper size] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size of paper into the specified tray or feeder. After loading the correct paper size, select 'Finished loading paper' on the printer control panel to proceed.
What to do if Lexmark MX317 displays 'Insufficient memory to support Resource Save feature [35]'?
Install additional printer memory or select 'Continue' on the printer control panel to disable Resource Save, clear the message, and continue printing.
What does 'Replace missing fuser [31.xyz]' mean on Lexmark All in One Printer?
This message indicates that you need to install the missing fuser in your Lexmark All in One Printer.
What does 'Scanner automatic feeder cover open' mean on Lexmark MX317 All in One Printer?
This message indicates that you need to close the ADF cover on the Lexmark All in One Printer.
What does 'Non?Lexmark [supply type], see User’s Guide [33.xy]' mean on my Lexmark MX317 All in One Printer?
This message indicates that the Lexmark All in One Printer has detected a non?Lexmark supply or part. To proceed with using non-genuine supplies or parts, press and hold the '#' button on the control panel simultaneously for 15 seconds to accept the risks.
How do I fix 'Cartridge, imaging unit mismatch [41.xy]' error on Lexmark MX317 All in One Printer?
To resolve this error, use only a supported toner cartridge and imaging unit in your Lexmark All in One Printer.
What to do if Lexmark All in One Printer displays 'Insufficient memory, some Held Jobs were deleted [37]'?
Select 'Continue' on the printer control panel to clear the message.
Why does my Lexmark MX317 All in One Printer say 'Load [paper source] with [custom type name] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size and type of paper into the specified tray or feeder. To use the tray that has the correct size or type of paper, select 'Finished loading paper' on the printer control panel.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Resolution | Up to 1200 x 1200 dpi |
| Processor Speed | 800 MHz |
| Memory | 256 MB |
| ADF Capacity | 50 sheets |
| Scan Resolution | Up to 600 x 600 dpi |
| Fax Transmission Speed | 3 seconds per page |
| Functions | Print, Copy, Scan, Fax |
| Copy Resolution | Up to 600 x 600 dpi |
| Maximum Paper Size | 8.5 x 14 inches |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Print Speed | 35 ppm |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Connectivity | Ethernet, USB, Wi-Fi |
| Input Capacity | 250 pages |
| Recommended Monthly Page Volume | 500 to 2500 pages |
| Mobile Printing | Yes |
| Copy Speed | Up to 35 cpm |
Information on setting up the printer on an Ethernet or wireless network.
Initial setup instructions and notes for configuring the fax function.
Instructions for sending faxes using the printer control panel or a computer.
Comprehensive guide to troubleshooting print jobs that are not printing at all.
Comprehensive guide to resolve issues with sending or receiving faxes.
Information on how to order parts and supplies, including toner cartridges.
To Next Page
