Lexmark MX317 User Manual

Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This
page also provides important information that aids network printing configuration.
1 From the printer control panel, navigate to:
> Settings > > Reports > > Network Setup Page >
2 Check the first section of the network setup page, and then confirm that the status is Connected.
If the status is Not Connected, then the LAN drop may not be active, or the network cable may be
malfunctioning. Consult your system support person for a solution, and then print another network setup
page.
Additional printer setup 29

Lexmark MX317 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	Up to 1200 x 1200 dpi
Processor Speed	800 MHz
Memory	256 MB
ADF Capacity	50 sheets
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Functions	Print, Copy, Scan, Fax
Copy Resolution	Up to 600 x 600 dpi
Maximum Paper Size	8.5 x 14 inches
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	35 ppm
Monthly Duty Cycle	Up to 50, 000 pages
Standard Connectivity	Ethernet, USB, Wi-Fi
Input Capacity	250 pages
Recommended Monthly Page Volume	500 to 2500 pages
Mobile Printing	Yes
Copy Speed	Up to 35 cpm