Lexmark MX317 User Manual

Maintaining the printer
Cleaning printer parts
Cleaning the printer
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
Notes:
• Perform this task after every few months.
• Damage to the printer caused by improper handling is not covered by the printer warranty.
1 Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Remove paper from the standard bin and multipurpose feeder.
3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.
4 Wipe the outside of the printer with a damp, soft, lint‑free cloth.
Notes:
• Do not use household cleaners or detergents, as they may damage the
finish
of the printer.
• Make sure that all areas of the printer are dry after cleaning.
5 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Maintaining the printer 153

Lexmark MX317 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	Up to 1200 x 1200 dpi
Processor Speed	800 MHz
Memory	256 MB
ADF Capacity	50 sheets
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Functions	Print, Copy, Scan, Fax
Copy Resolution	Up to 600 x 600 dpi
Maximum Paper Size	8.5 x 14 inches
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	35 ppm
Monthly Duty Cycle	Up to 50, 000 pages
Standard Connectivity	Ethernet, USB, Wi-Fi
Input Capacity	250 pages
Recommended Monthly Page Volume	500 to 2500 pages
Mobile Printing	Yes
Copy Speed	Up to 35 cpm