4 Navigate to:
Copy to >
> select the tray containing the paper size and type you want to use > > select the
number of copies or enter a number on the keypad >
5 If there are no trays that contain the paper size and type you want to use, then do the following:
a Navigate to:
Copy to >
> Manual Feeder > > select the paper size > > select the paper type >
b Load the size and type of paper into the multipurpose feeder, and then press .
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
.
6 Press the left or right arrow button to scroll to Finish the Job, and then press .
Reducing or enlarging copies
Copies can be scaled from 25% to 400% of the original document size.
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the printer control panel, navigate to:
> Copy > > Scale > adjust the scale setting > select the number of copies or enter a number on
the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
4 Press the left or right arrow button to scroll to Finish the Job, and then press .
Making a copy lighter or darker
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass in
the upper left corner.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
Copying 60
To Next Page
Loading...
Need help?
General
