3 From the printer control panel, navigate to:
> Copy > > Copy from > select the size of the original document
4 Navigate to:
Copy to >
> select the tray containing the transparencies > > select the number of copies or enter
a number on the keypad >
5 If there are no trays that contain transparencies, then do the following:
a Navigate to:
Copy to >
> Manual Feeder > > select the size of the transparencies > > Transparency >
b Load transparencies into the multipurpose feeder, and then press .
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
6 Press the left or right arrow button to scroll to Finish the Job, and then press .
Copying on letterhead
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the printer control panel, navigate to:
> Copy > > Copy from > select the size of the original document
4 Navigate to:
Copy to >
> select the tray containing the letterhead > > select the number of copies or enter a
number on the keypad >
5 If there are no trays that contain letterhead, then do the following:
a Navigate to:
Copy to >
> Manual Feeder > > select the size of the letterhead > Letterhead
b Place the letterhead faceup, top edge first into the multipurpose feeder, and then press .
Copying 58
To Next Page
Loading...
Need help?
General
