To Next Page
J
John LynnAug 29, 2025
How to resolve 'Fax memory full' error on Lexmark MX317 All in One Printer?
- XxwolfeAug 29, 2025
To clear the 'Fax memory full' message on your Lexmark All in One Printer, touch 'Continue' on the printer control panel.
How to resolve 'Fax memory full' error on Lexmark MX317 All in One Printer?
To clear the 'Fax memory full' message on your Lexmark All in One Printer, touch 'Continue' on the printer control panel.
What to do if Lexmark All in One Printer says 'Load multipurpose feeder with [custom string] [orientation]'?
Load the feeder with the correct paper size and type. Depending on your printer model, touch 'Continue' or press the button to clear the message and continue printing.
Why does my Lexmark MX317 All in One Printer say 'Load [paper source] with [custom type name] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size and type of paper into the specified tray or feeder. To use the tray that has the correct size or type of paper, select 'Finished loading paper' on the printer control panel.
What to do if Lexmark All in One Printer displays 'Insufficient memory, some Held Jobs were deleted [37]'?
Select 'Continue' on the printer control panel to clear the message.
What to do if Lexmark All in One Printer displays 'Fax server 'To Format' not set up. Contact system administrator.'?
Select 'Continue' from the printer control panel to clear the message. Complete the Fax Server setup.
What to do if Lexmark All in One Printer displays 'Scanner disabled by admin [840.01]'?
Print without the scanner, or contact your system support person.
What to do if Lexmark MX317 All in One Printer displays 'Too many trays attached [58]'?
Turn off the printer and remove the extra trays.
What to do if Lexmark MX317 shows 'Scanner jam, remove jammed originals from the scanner [2yy.xx]'?
If your Lexmark All in One Printer displays a 'Scanner jam' message, remove the jammed paper from the scanner.
Why does my Lexmark MX317 All in One Printer say 'Load multipurpose feeder with [paper size] [orientation]'?
This message means that the Lexmark All in One Printer needs the correct paper size loaded into the multipurpose feeder. Once you have loaded the correct size, either touch 'Continue' or press the button, depending on your printer model, to clear the message and continue printing.
Why does my Lexmark MX317 say 'Load [paper source] with [paper size] [paper orientation]'?
This message indicates that the Lexmark All in One Printer requires you to load the correct size of paper into the specified tray or feeder. After loading the correct paper size, select 'Finished loading paper' on the printer control panel to proceed.
Information on setting up the printer on an Ethernet or wireless network.
Initial setup instructions and notes for configuring the fax function.
Instructions for sending faxes using the printer control panel or a computer.
Comprehensive guide to troubleshooting print jobs that are not printing at all.
Comprehensive guide to resolve issues with sending or receiving faxes.
Information on how to order parts and supplies, including toner cartridges.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Resolution | Up to 1200 x 1200 dpi |
| Processor Speed | 800 MHz |
| Memory | 256 MB |
| ADF Capacity | 50 sheets |
| Scan Resolution | Up to 600 x 600 dpi |
| Fax Transmission Speed | 3 seconds per page |
| Functions | Print, Copy, Scan, Fax |
| Copy Resolution | Up to 600 x 600 dpi |
| Maximum Paper Size | 8.5 x 14 inches |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Print Speed | 35 ppm |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Standard Connectivity | Ethernet, USB, Wi-Fi |
| Input Capacity | 250 pages |
| Recommended Monthly Page Volume | 500 to 2500 pages |
| Mobile Printing | Yes |
| Copy Speed | Up to 35 cpm |
