10 Insert the pick roller assembly.
11 Place the printer in its original position, and then insert the tray.
12 Open the front door.
13 Insert the imaging unit.
14 Close the front door.
15 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
16 Turn on the printer.
Saving energy and paper
Configuring
the power save mode settings
Sleep mode
1
From the home screen, touch Settings > Device > Power Management > Timeouts > Sleep Mode.
2 Specify the amount of time that the printer stays idle before it enters Sleep Mode.
Maintain the printer 150
To Next Page
Loading...
