Lexmark MB3442adw - Page 155

Action Yes No
Step 1
a Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the cartridge is not supported, then install a
supported one.
b Print the document.
Is the printer printing blank or white pages?
Go to step 2. The problem is
solved.
Step 2
a Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
aect the quality of future print jobs.
b Check the imaging unit for signs of damage.
Note: Make sure that the photoconductor drum contact is not
bent or out of place.
c Firmly shake the imaging unit to redistribute the toner.
d Insert the imaging unit.
e Print the document.
Is the printer printing blank or white pages?
Go to step 3. The problem is
solved.
Step 3
Replace the toner cartridge.
Is the printer printing blank or white pages?
Go to step 4. The problem is
solved.
Step 4
Replace the imaging unit.
Is the printer printing blank or white pages?
Contact
customer
support.
The problem is
solved.
Dark print
Troubleshoot a problem 155